How To Build A Wooden Shed In Just One Weekend
If you have a lot of important "stuff" piling up in the corner of your garage, wouldn't it be great to have a better place to store it? The solution - a wooden shed. And, the good news is it only takes two days to get it done (that's assuming you have the materials purchased already from the local supply store.) Here is a quick overview:
Day 1 - A Solid Foundation and Framework
First things first - preparing the site. The site should be fairly level. However it is best to have a slight pitch downward towards the back for optimum water runoff. Next, get rid of any large rocks or debris. You want the foundation to be as smooth as possible. And, since this is only a 2-day project, you will have to make your shed with a wood floor, preferably skids, instead of a concrete floor. If you do want a concrete foundation, allow a few extra days to your plan to allow for drying. The advantages of building a wooden floor are its faster, cheaper, easier and more portable. Now use patio (or cinder) blocks for which to rest the frame of the floor. Make sure they are level.
Next, start working on the actual building. You need to cut the floor joists at equal lengths by using the first on as a template for the rest. For added strength, use deck screws instead of nails. Using a power drill makes construction go very quickly and is actually easier than hammering. Once you are finished framing the floor, check for square by measuring opposite diagonal corners. If square, the measurements will be the same. If they are off, push on one of the corners with the longer measurement towards the opposite corner until the measurements are equal. Now you can nail the plywood subfloor to the frame making sure to stagger them (similar to a brick pattern). This will prevent you from having four corners of four different pieces of plywood meeting in the middle of your floor causing a weak spot.
Start building the walls by using the same process used for building the frame for the floor. Frame any desired windows at this time. Use T1-11 plywood for the siding. It has vertical grooves cut into it which gives the appearance of tongue and groove siding. But since it comes in sheets, it has a huge time advantage over nailing individual boards. Now place a piece of T1-11 (outside facing up) on top of one of the wall frames. Make the wall frame square by using the same method used to make the floor. Start nailing the siding to the frame by working from one side to the other. Trim down the siding to the outside of the frame by using a router. Now that you have all the walls put together, attach them to the floor and temporarily brace them with 2x4s to hold them up until you have them firmly screwed together. Take your level and check the walls for plumb. They should be perfectly straight up and down. Now rest up for tomorrow.
Day 2 - A Roof Overhead And A Door To Pass Through
Building the trusses is the first item for today. Using your plans, cut and assemble the pieces of your first truss but don't nail it together just yet. Once you have all the pieces fitting together correctly, use each piece as a template for the remaining pieces of the trusses. Now screw (or nail) all the trusses together. Attach the trusses to the top plate of the shed walls. The trusses are now ready for the plywood sheeting that makes the roof. Installation of asphalt shingles is exactly the same as installing them on a house by first putting down roofing felt (tar paper). Be sure to start at the bottom and overlap each row as you go up. The top ridge is made from a couple of layers to add strength. When applying the shingles the seams should be offset. Just like the tar paper, work your way up from the bottom. Cut down a length of shingle into single shingles to make ridge cap. Shingles usually come in a line of three per sheet. Nail these down overlapping one another.
You should use a door on your shed that is prefabricated which will save you a huge amount of time since all you need to do is attach it with hinges. You will want to finish off the door with trim.
A few details have been omitted from this short article as it is simply intended to show you how possible and simple it is to build a wooden shed in only one weekend.
Donald Rickerby is has been constructing and consulting on backyard wooden sheds for over 10 years. If you are looking to build your own shed, make sure to visit his informative site: BestWoodenSheds.com
